Solve a small-molecule structure

From CCP4 wiki
Jump to navigation Jump to search

The following is based on the experience of a protein crystallographer who one day obtained a small-molecule dataset and managed to solve and refine it without prior knowledge what the crystallized substance was, and without experience in small-molecule crystallography. It was a very rewarding experience (see the figure at the bottom) which is why it's written up here.

This writeup is only meant for the protein crystallographer who occasionally has to use existing tools on a small-molecule dataset. To understand things more thoroughly, one has to read http://shelx.uni-ac.gwdg.de/SHELX/shelx.pdf . There are lots of tutorials available from George Sheldrick's website, but also from others, e.g. [1].

Maybe it should also be stated that this was a simple case, without e.g. twinning or disorder! Furthermore, the hand of the structure was not an issue.

Reduce the data with your favourite data processing software

I use XDS. The decision about the spacegroup has to be postponed, but it surely helps if the correct Laue group is employed during scaling. In the case considered here, the CORRECT step suggested P222 (XDS really only should suggest "222 point symmetry" because CORRECT does not look at systematic absences at this point).

Determine the spacegroup

There are two ways to determine the spacegroup:

  1. use XPREP
  2. use CCP4 POINTLESS - latest docs at [2]

These two possibilities also differ in the way how to obtain a file suitable for input to the SHELX program.

If there are different spacegroup possibilities then (downstream, in structure solution and refinement) we need to try all of them in turn, until we hit one that refines really satisfactorily (R-factor below, say, 5%) and gives a structure that makes sense.

use XPREP to find possible spacegroups

There is no longer a need to use XDSCONV to convert the XDS_ASCII.HKL reflection file to HKLF 4 format (which is what the SHELX programs read) since XPREP can read XDS_ASCII.HKL directly. Just run

xprep

without a filename, and when the filename prompt appears, enter:

XDS_ASCII.HKL

(or whatever you have renamed it to) and then hit <Enter> several times until the program suggests a list of spacegroups - this list is going to be important. It may help to observe whether the data are centrosymmetric or not, from the 8th non-blank line below. Fortunately, this time there's only one spacegroup consistent with the data:

SPACE GROUP DETERMINATION


Lattice exceptions:  P      A      B      C      I      F     Obv    Rev    All

N (total) =           0  28832  28824  28788  28823  43222  38376  38344  57564
N (int>3sigma) =      0  17961  18421  18158  17862  27270  24715  24627  36959
Mean intensity =    0.0   22.7   23.7   24.8   23.4   23.7   24.7   24.8   24.8
Mean int/sigma =    0.0    9.6   10.0    9.9    9.6    9.8   10.0   10.0   10.0


Crystal system O and Lattice type P selected

Mean |E*E-1| = 0.939 [expected .968 centrosym and .736 non-centrosym]

Chiral flag NOT set



Systematic absence exceptions:

         b--   c--   n--  21--   -c-   -a-   -n-  -21-   --a   --b   --n  --21 

N      1884  1884  1892     7   988  1014   992    28   545   541   534    72
N I>3s  706   706     0     0   304     0   304     0     0   203   203     0
<I>    25.2  25.2   0.5   0.0  18.2   0.4  18.1   0.4   0.4  25.0  25.4   0.4
<I/s>   7.3   7.3   0.5   0.2   6.6   0.5   6.6   0.5   0.4   7.4   7.6   0.4


Identical indices and Friedel opposites combined before calculating R(sym)

Option  Space Group  No.  Type  Axes  CSD  R(sym) N(eq)  Syst. Abs.   CFOM

[A] Pccn           # 56  centro   3   196  0.023  10123  0.5 /  6.6   2.23

Option [A] chosen

After that, say "c" for "define unit-cell CONTENTS", and input a reasonable number of carbon atoms (I used C20). Get out of this menu with "E". Then, choose "f" for "set up shelxtl FILES". Then, answer the question "XM/SHELXD (M) or XS/SHELXS (S) format [S]:" with "m" since we're going to use shelxd for solving the structure. Answer the question about the name (I used the spacegroup number as I knew I would have to test several possibilities). Finally, "q"uit the program. This writes 56.ins :

TITL 56 in Pccn 
CELL 0.71073  14.4330  28.7040   8.4880  90.000  90.000  90.000
ZERR   11.00   0.0029   0.0057   0.0017   0.000   0.000   0.000
LATT  1
SYMM 0.5-X, 0.5-Y, Z
SYMM -X, 0.5+Y, 0.5-Z
SYMM 0.5+X, -Y, 0.5-Z
SFAC C
UNIT 220
FIND    16
PLOP    22    27    31
MIND 1.0 -0.1
NTRY 1000
HKLF 4
END

Compared to the P1 setting that CORRECT chose, XPREP has re-indexed the data in this example such that the conventional setting is obtained for this space group.

If necessary XPREP can read in several XDS_ASCII.HKL files, scale them together and merge them. However it needs to start with one file to get the space group so that it knows how to merge.

use POINTLESS to find possible spacegroups

Unless the spacegroup number in XDS_ASCII.HKL already indicates this, pointless needs to be told that the spacegroup may not be restricted to those 65 which occur for crystals from macromolecules:

echo CHIRALITY NONCHIRAL | pointless xdsin XDS_ASCII.HKL

gives

         Zone                Number PeakHeight  SD  Probability  ReflectionCondition

Zones for Laue group P m m m
 1 screw axis 2(1) [a]           11   0.990   0.135   *** 0.972   h00: h=2n
 2 screw axis 2(1) [b]           59   1.000   0.097   *** 0.986   0k0: k=2n
 3 screw axis 2(1) [c]          131   0.997   0.062   *** 0.994   00l: l=2n
 4        glide plane b(a)     3754   0.012   0.050       0.000   0kl: k=2n
 5        glide plane c(a)     3754   0.013   0.050       0.000   0kl: l=2n
 6        glide plane n(a)     3754   0.951   0.061   *** 0.988   0kl: k+l=2n
 7        glide plane a(b)     1961   0.953   0.050   *** 0.990   h0l: h=2n
 8        glide plane c(b)     1961   0.104   0.056       0.004   h0l: l=2n
 9        glide plane n(b)     1961   0.100   0.056       0.004   h0l: h+l=2n
10        glide plane a(c)     1074   0.960   0.058   *** 0.991   hk0: h=2n
11        glide plane b(c)     1074   0.080   0.058       0.003   hk0: k=2n
12        glide plane n(c)     1074   0.072   0.050       0.002   hk0: h+k=2n

<!--SUMMARY_END-->


Possible spacegroups:
--------------------
Indistinguishable space groups are grouped together on successive lines

'Reindex' is the operator to convert from the input hklin frame to the standard spacegroup frame.

'SysAbsProb' is an estimate of the probability of the space group based on
the observed systematic absences.

'Conditions' are the reflection conditions (absences)
'TotProb' is a total probability estimate (unnormalised) including the probability
of the crystal being centrosymmetric from the <|E^2-1|> statistic.
Chiral space groups are marked '*' and centrosymmetric ones 'O'


   Spacegroup         TotProb SysAbsProb     Reindex         Conditions

     <P n a a> ( 56) O  0.823  0.911                         h00: h=2n, 0k0: k=2n, 00l: l=2n, 0kl: k+l=2n, h0l: h=2n, hk0: h=2n (zones 1,2,3,6,7,10)


---------------------------------------------------------------


Selecting space group P n a a as there is a single space group with the highest score

The spacegroup that was used for CORRECT does not matter. The next step then is to generate a HKLF 4 file, using XDSCONV:

SPACE_GROUP_NUMBER=   56
UNIT_CELL_CONSTANTS=    14.433    28.704     8.488  90.000  90.000  90.000
INPUT_FILE=XDS_ASCII.HKL
OUTPUT_FILE=56.hkl SHELX

Please note that the file 56.ins has to be set up manually in this case (just take the 56.ins from above, and adjust the symops and cell parameters). The numbers after "FIND" and "PLOP" should probably be adjusted in proportion to the expected number of atoms in the asymmetric unit.

Solve the structure with SHELXD

Just run "shelxd 56". You may interrupt it with Ctrl-C once it has found a good solution, as suggested by

Try 11:20  Peaks 99 92 87 87 87 83 77 73 71 70 68 68 64 64 64 63 62 62 61 60
R = 0.294, Min.fun. = 0.747, <cos> = 0.491, Ra = 0.235
Try    11, CC All/Weak 59.81 / 46.01, best 59.81 / 46.01, best final CC  0.00
Peaklist optimization cycle  1    CC = 77.51 %    BG = 0.322   for   22 atoms
Peaks: 99 90 87 85 82 77 75 74 66 64 64 64 63 63 62 57 39 39 36 36 33 31    
Fragments: 17 5                                                              
Peaklist optimization cycle  2    CC = 88.80 %    BG = 0.225   for   25 atoms
Peaks: 99 95 89 88 87 84 82 79 78 78 77 76 75 75 74 73 73 71 71 69 67 65 40 
Fragments: 25                                                                
Peaklist optimization cycle  3    CC = 88.85 %    BG = 0.223   for   25 atoms
Peaks: 99 96 89 87 86 86 82 79 79 76 76 75 75 75 73 73 72 71 69 69 67 65 63 
Fragments: 25                                                                

This solution obviously fulfills the requirement "When the final correlation coefficient CC (after PLOP) for an atomic resolution ab initio run of SHELXD is 65% or greater, the structure is almost certainly solved." in http://shelx.uni-ac.gwdg.de/SHELX/shelxdec/shelx-de.pdf .

The resulting 56.res is:

REM TRY     23   FINAL CC 88.85   TIME       3 SECS
REM Fragments: 25
REM 
TITL 56 in Pccn
CELL 0.71073  14.4330  28.7040   8.4880  90.000  90.000  90.000
ZERR   11.00   0.0029   0.0057   0.0017   0.000   0.000   0.000
LATT  1
SYMM 0.5-X, 0.5-Y, Z
SYMM -X, 0.5+Y, 0.5-Z
SYMM 0.5+X, -Y, 0.5-Z
SFAC C
UNIT 220
C001  1  0.45835  0.41566  0.09083 11.00000 0.1   99.00
C002  1  0.36894  0.55007 -0.58932 11.00000 0.1   95.84
C003  1  0.52129  0.72099 -0.95623 11.00000 0.1   89.35
C004  1  0.67521  0.30725  0.04587 11.00000 0.1   87.55
C005  1  0.40328  0.54911 -0.45947 11.00000 0.1   85.96
...
C021  1  0.60567  0.70055 -0.97749 11.00000 0.1   66.94
C022  1  0.49503  0.62079 -0.48787 11.00000 0.1   64.91
C023  1  0.60066  0.62034 -0.48599 11.00000 0.1   63.62
C024  1  0.63251  0.26331  0.06189 11.00000 0.1   63.01
C025  1  0.47217  0.73227 -1.09548 11.00000 0.1   61.79
HKLF 4
END 

hints from George Sheldrick

From a November 2011 posting: UNIT specifies the number of atoms of each type in the unit-cell. For such 'small-molecule' problems you should try to get the numbers of heavier atoms correct, if only CHNO are present any numbers will do.

For such problems I recommend setting FIND to about 70% of the number of atoms (excluding H) in the asymmetric unit.

The first PLOP number should be approximately the number of atoms (excluding H) in the asymmetric unit. The second PLOP number should be about 1.2 times this and the third about 1.4 times it (three PLOP cycles are enough). This allows the 'peaklist optimization algorithm' to throw out some of the atoms.

You will need data to 1.2A or better (1.0 is much better than 1.2!). The data should be as complete as possible.

Refine using SHELXL

Copy 56.res to 56.ins. Insert

ACTA
LIST 6
L.S. 10

after the UNIT 220 instruction, and run "shelxl 56". This gives a first refined model, and its electron density map, plus the relevant statistics.

general idea of refining a structure

Starting from a rough guess of the number of atoms, we adjust the model, guided by the refinement results. This is an iterative process, in which we repeatedly edit 56.res to reflect our change of conception of the structure, replace 56.ins with it, and run SHELXL again.

assigning chemical types

Since we know that there's not only carbon atoms, but likely also N, O and H, we modify 56.ins to have

SFAC C N O H
UNIT 200 100 100 40

(the actual numbers after UNIT can be taken from the .lst file of SHELXL, they don't seem to matter much.)

We tell SHELXL the chemical identity by putting a 1 for a C, a 2 for a N, a 3 for an O, and a 4 for a H - the number is just the order of the atom in the SFAC line.

The chemical identity of an atom can be found from geometric parameters, and its electron density. The electron density can be displayed e.g. in coot, by loading the 56.fcf file written by SHELXL. Geometric parameters (in particular distances) are listed in the 56.lst file. Typical bond distances of C-C, C=C, C-O, C=O, C-N and X-H are about 1.54, 1.34, 1.43, 1.24, 1.47 and 1.0 A, respectively.

As a proxy to electron density we can use the refined ADPs. Atoms initially called "C", but with very low U values after refinement, are most likely O or N atoms.

For the H atoms, we just move the atoms from the bottom of the .res file to those lines where the refined atoms are, if the distances to existing (heavy) atoms are close to 1 A. For hydrogens bond to carbons we could alternatively use the HFIX instruction which sets up suitable AFIX instructions for the standard 'riding H-atom' refinement (shelXle - see below - can do this with one click). This would require lines of the form (e.g.)

HFIX 13 XXX

where the first digit 1 means tert-CH (2 would mean methylen-CH2, 3 would mean methyl-CH3, 4 would mean aromatic CH), and the second digit 3 means the normal riding model. XXX stands for the carbon atom name.

Finishing the structure

Finally we switch to anisotropic refinement by putting an

ANIS

line into 56.ins . More info about refinement options is in the SHELXL article!

Resolution

To quote George Sheldrick:: SHELXL "prints R values for all data and for I>2sig(I) [F>4sig(F)]. The user can of course improve these by cutting back the resolution but if he or she oversteps 0.84A he/she will be caught by the CIF police. This works like a radar trap so weak datasets are usually truncated to 0.84A whether or not there are significant data to that resolution. It is always instructive to compare the R-values for all data and I>2sig(I); if the former is substantially larger, a lot of noisy outer data have been included."

Electron density

The figure shows the final electron density (blue), but with an O atom refined as N. This gives strong positive (green) difference electron density.

Diffden.png

The difference map also shows distinct bonding electron density on most of the bonds.


A GUI for refining small molecule structures

A GUI called shelXle written by Christian Huebschle is now available for refining small molecule crystal structures with shelxl: http://ewald.ac.chemie.uni-goettingen.de/shelx