Custom building Coot from source code: Difference between revisions

From CCP4 wiki
Jump to navigation Jump to search
m (better link to autobuild scripts)
(removed because it is 10 yrs old)
Tag: Blanking
 
(6 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Return to [[coot]]


These instructions are current as of coot release 0.5.
The following is specific to Ubuntu linux, but should be generalizable to any recent linux distribution.
'''This is a so-called "advanced" task. Don't attempt it unless you would rather compile your own software than use pre-compiled versions. The standard (supported) method for installing Coot is to download a pre-compiled binary, or to use [[Coot#Installation_from_source_code_via_autobuild_scripts |the autobuild scripts]].'''
==Installing pre-compiled Coot binaries==
===Avoiding manual installation===
This page describes full manual installation, for those who want (or need) to do it.  It is not necessary on most systems. For autobuild and for installation of precompiled Coot binaries, see [[Coot#Installing_Coot | Installing Coot]]
===Debian packages for Coot and its Dependencies===
Please be aware that everything compiled below has been archived as [[Coot#Instalation_on_Debian.2FUbuntu_from_debian_archive_files | Debian archive files]] that you can easily install.
==Install gpp4 and other dependencies on Linux.==
Instead of using ccp4-onlylibs-dev, we want to use ssm, mmdb, gpp4 and clipper packages.   
To keep things tidy, I suggest installing everything into /usr/local/xtal   
Install these in the order described:
===mmdb===
wget http://www.ebi.ac.uk/~keb/cldoc/downloads/mmdb-1.19.tar.gz
./configure --prefix=/usr/local/xtal --includedir=/usr/local/xtal/include
make
make install
===ssm===
wget ftp://ftp.bioxray.au.dk/pub/mok/src/ssm-0.1.tar.gz
CPPFLAGS=-I/usr/local/xtal/include ./configure --prefix=/usr/local/xtal --includedir=/usr/local/xtal/include
make
make install
===gpp4===
wget ftp://ftp.bioxray.au.dk/pub/mok/src/gpp4-1.0.4.tar.gz
CPPFLAGS=-I/usr/local/xtal/include ./configure --prefix=/usr/local/xtal --includedir=/usr/local/xtal/include
make
make install
===fftw===
We need to compile fftw in a way that differs from that used to make the standard linux distribution of fftw. So to do that, we will install our own in /usr/local/xtal/lib, so it will remain hidden from the rest of the system, unless directed to look for it there.
ftp://ftp.fftw.org/pub/fftw/old/fftw-2.1.5.tar.gz
CPPFLAGS=-I/usr/local/xtal/include ./configure --prefix=/usr/local/xtal --includedir=/usr/local/xtal/include --enable-float
make
make install
===clipper===
wget http://www.ysbl.york.ac.uk/~cowtan/clipper/clipper20ac.latest.tar.gz
CPPFLAGS=-I/usr/local/xtal/include ./configure --prefix=/usr/local/xtal --includedir=/usr/local/xtal/include -enable-shared --with-gpp4=/usr/local/xtal --with-mmdb=/usr/local/xtal --with-fftw=/usr/local/xtal --enable-mmdb --enable-minimol --enable-cif --enable-cns --enable-gpp4
make
make install
Note that if the primary server for the source code is down, you can often find what you need mirrored elsewhere, eg:
http://distfiles.msn.wi.us.finkmirrors.net/mirrors/fink/distfiles
==Make sure the other needed dependencies are installed==
These include at least the following dependencies:
===Ubuntu packages===
A [[list of coot dependencies]] that is probably only a subset
===Others that you have to make yourself: ===
[http://download.gna.org/guile-lib guile-lib] (I had to compile this myself as described below)
[http://arglist.com/guile/goosh-1.3/ goosh] (I had to compile this myself)
[http://www.ossau.uklinux.net/guile/ guile-gui]  (I had to compile this myself)
[http://www.gnu.org/software/guile-gtk/ guile-gtk-2.0] (I had to compile this myself)
[http://www.ysbl.york.ac.uk/~emsley/software/extras/net-http-0.3.1.tar.gz net-htttp] (I had to compile this myself)
To compile these, use the commands
configure --prefix=/usr
make
sudo make install
This puts stuff into /usr, rather than /usr/local or /usr/local/xtal, which you might not want to do.  The aim is to eventually get these into the standard system distribution, in which case they will reside in /usr with the other guile extensions. All of these should work with guile-1.8.
==Configuring and building coot ==
===Start a root shell session===
If root is enabled, log into a root shell, or else if you have sudo (debian, ubuntu, etc), use the command
sudo zsh
(or whatever shell) to open a root shell, and issue the following commands as indicated.
===Fix a configure bug===
First, issue the following command to fix a configure bug when compiling with gpp4:
perl -pi -e 's|lccp4c|lgpp4|g' configure
===Now configure this way: ===
<pre>
PATH="/usr/local/xtal/bin:$PATH" \
CPPFLAGS="-I/usr/local/xtal/include -I/usr/local/xtal/include/clipper -I/usr/local/xtal/include/gpp4 -I/usr/local/xtal/include/mmdb -I/usr/local/xtal/include/ssm" \
./configure --prefix=$PWD \
--with-gpp4=/usr/local/xtal \
--with-mmdb-prefix=/usr/local/xtal \
--with-ssmlib-prefix=/usr/local/xtal \
--with-clipper-prefix=/usr/local/xtal \
--with-fftw=/usr/local/xtal \
--with-glut-prefix=/usr --with-gl-prefix=/usr/X11R6 \
--with-gtk2 --with-gnomecanvas-prefix=/usr \
--with-imlib-prefix=/usr --with-gtkgl-prefix=/usr \
--with-glib-prefix=/usr --with-guile-gtk \
--with-guile-gtk-prefix=/usr --with-gsl-prefix=/usr \
--with-guile --with-python
</pre>
===Then, remake the  src/coot_wrap_python.cc and src/coot_wrap_guile.cc files: ===
/bin/rm -f **/coot_wrap_**.cc
cd src
touch c-interface-database.hh
make coot_wrap_guile.cc
make coot_wrap_python.cc
cp coot_wrap_guile_pre.cc coot_wrap_guile.cc
cd ..
===Now compile coot:===
make
make -i install
===To make it play nice with python, I have had to do the following: ===
perl pi -e 's|PYTHONHOME=\$COOT_PREFIX|\#PYTHONHOME=\$COOT_PREFIX|g' bin/coot
cp src/coot.py python/.
cp src/coot.py share/coot/python/.
===Now add the reference structures: ===
cd share/coot
wget http://www.ysbl.york.ac.uk/~emsley/software/coot-reference-structures.tar.gz
tar xvfz coot-reference-structures.tar.gz ; rm coot-reference-structures.tar.gz
=== Now add the refmac dictionaries===
(eg using coot-0.5 and refmac 5.4; change as required):
cd /tmp
wget  wget http://www.ysbl.york.ac.uk/refmac/data/refmac5.4_dictionary.tar.gz
tar xvfz refmac5.4_dictionary.tar.gz
mkdir -p  /usr/local/xtal/coot-0.5/lib/data
cp -r dic /usr/local/xtal/coot-0.5/lib/data/monomers
===Export the COOT_REFMAC_LIB_DIR variable ===
(you can edit bin/coot):
  export COOT_REFMAC_LIB_DIR=$COOT_PREFIX/lib
===Notes on the above: ===
The configure command is all one line; I've escaped the return. Using --prefix=$PWD simply keeps everything self-contained.  You can use any install prefix you want to (it defaults to /usr/local; another sensible choice is /usr/local/xtal.  Avoid /usr as a prefix, as it can mess with your system).
The''' make -i install''' is needed if you choose --prefix=$PWD because it tries to install some files where they are presently situated.
----
==If you want to make it more portable==
You don't need to do this to run coot; this is only handy if you need to redistribute it (or make say a debian package).
You can see what dynamic libraries coot needs to load by issuing the command
ldd coot-real
or, if you just want to see the full path to the libraries, issue
ldd coot-real | awk '{print $3}' | grep -v fff | sort -u
You can use additional grep filters to select the ccp4 libs, clipper libs, eliminate coot's own libaries (that are already in the lib directory) and so forth.
(The '''ldd''' command is equivalent to '''otool -L''' on Mac OS X.)  Then you can copy these into coot's lib directory. I used the following commands in zsh to copy in the needed directories (this is overkill, but wtf).
<pre>
cd /usr/local/xtal/coot/bin
foreach dylib in $(ldd coot-real | awk '{print $3}' | grep -v fff | grep -v "usr/local/xtal/coot" | sort -u )
      print copying $dylib
      sudo cp -i $dylib /usr/local/xtal/coot/lib/.
end
</pre>
In addition, the guile modules can all be put in one centralized location:
cp -R /usr/share/guile* /usr/local/xtal/coot/share/.
Return to [[coot]]

Latest revision as of 12:42, 2 February 2021

Retrieved from "https://wiki.uni-konstanz.de/ccp4/index.php?title=Custom_building_Coot_from_source_code&oldid=2717"